JSP Force 8 Half Mask with P3 Press To Check Filters - (Large size only)
JSP Force 8 Half Mask with P3 Press To Check Filters - (Large size only)
Force 8 Half-mask with PressToCheck™ P3 R D Filters
The Force 8 twin cartridge half mask with Typhoon™ valve offers superior low breathing resistance and a 4-point suspension harness with quick release buckles. The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask accepts the full range of low profile Force™ 8 filters giving the Force™ 8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours.
Award winning
Winner of the BSIF Product Innovation Award.
Comfort
Durable thermoplastic rubber mask for superior fit to most face shapes.
Harness
Fully adjustable 4-point cradle suspension ensuring an effective facial fit.
CR2 Reflectivity
Reflective strips create increased visibility in low-light environments for added safety.
Typhoon™ Exhalation Valve
Low resistance exhalation valve for easy breathing, with stable mask configuration.
Force™ Filters
Cost effective Force™ 8 filters available with low profile angle for minimum visual impairment.
With these filters you can instantly check that you have the correct seal time.
Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
Press the front and backs of both filter covers together to stop air from entering through the filters.
No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.
Features & benefits
Daily Face Fit Reassurance.
Passes dolomite.
Protection against construction dust.
Improved hygiene.
Inhalation valve for easy maintenance.
Low profile covers protect filters.
Cleaning advice for Covid19:
Reusable masks such as the Force™8 and Force™10 have been developed with cleaning as part of the design specification. However the cleaning methods used in the products normal application are not suitable for killing the Coronavirus.
Limited trials of different disinfection processes have been carried out. These show positive results when combined with the checks that are detailed in the standard user instructions for the products.
Wipes – Clinell and Isopropyl alcohol - leaving the filters in place on the masks and cleaning all surfaces with the wipes. Allow the mask to air dry. The Force™8 mask harness elastic straps may need to be removed for additional cleaning depending on local requirements.
Immersion – solutions of Milton™, Actichlor™, Hydrogen Peroxide (maximum 3%) - remove the filters from the mask and immerse in a solution diluted as advised by the manufacturer. After the required period, remove and rinse under clean water ensuring all traces of solution are removed. Allow the mask to air dry.
Vapour treatment Hydrogen peroxide – hydrogen peroxide concentrations above 3% will have a detrimental effect on the polymer of the faceseal of the Force™8 and Force™10 masks. This sterilisation process is not suitable for the masks.
Washing - MEIKO TopClean M respirator cleaning and disinfection machine – using program 1 and drying at 50°C in a drying cabinet, disinfectant: EW 80 Mat (Dosing: 1 %) from EW 80 Systeme GmbH. rinse aid: GT 500 from etol-Werk Eberhard Tripp GmbH & Co.